Largo P1
Largo P1 is a highly refined, low odour, low viscosity mineral oil possessing excellent lubricating properties, good viscosity index and good demulsification properties.
Largo P1 is very pale in colour has low carbon aromatics content and good oxidation resistance.
Application
It is ideal for high speed spindle bearings on grinding machines and other applications where a non EP grade of this viscosity is requested by the equipment manufacturer.
Typical Specifications:
|
ISO Oil Type |
HH |
|
Relative Density @15.6°C IP160 |
0.838 |
|
Kinematic Viscosity 40°C mm2/s IP71 |
3.9 |
|
Pour Point °C IP15 |
-17 |
|
Flash Point Closed Cup °C IP34 |
116 |
|
Foam Tendency/Stability IP146 |
|
|
Sequence I |
20/0 |
|
Sequence II |
5/0 |
|
Sequence III |
10/0 |
|
Aniline Point, °C ASTM D611 |
84 |
|
Water Separation(min) ASTM D1401 |
2 |
|
Air Release(min) IP313 |
2 |
|
Total Acid No. mg.KOH/g ASTM D974 |
0.01 |
|
ISO Cleanliness Value - equal or better than |
16/13 |
*These values are typical only and do not constitute a specification.
Note: Due to the highly refined nature of Largo P1, it may also be successfully utilized in Spark Erosion applications where a product of this viscosity is desired. A separate technical data sheet is available on request covering such applications.
|
Contact
AXCL Gulf
P.O.Box 41563
Sharjah, United Arab Emirates
Tel : +971-6-526.30.30
Fax : +971-6-526.31.31
Email : info@axcllubes.com
|
